Abrasives for compressed air eccentric sanders LEX 185
Abrasives for compressed air eccentric sanders LEX 185
Featured Products
There are no products matching the selection.
- Home
- Products
-
Festool
- DOMINO Joining System
-
Sanding and Finishing
- SURFIX Oiling System
- Mixed Abrasives Packs (for D150mm sanders)
- ROTEX 3-in-1 Sander/Polisher RO 150
- ROTEX 4-in-1 Sander/Polisher/Delta RO 90
-
ROTEX 3-in-1 Sander/Polisher RO 125
- Polishing Pads and Accessories RO 125
-
Abrasives for ROTEX RO 125 Sander
- Titan 2 - Stickfix sanding discs for motor repairs, diameter 125mm
- Platin 2 - Stickfix sanding discs for fine-sanding, diameter 125mm
- Brilliant 2 - Stickfix sanding discs for paint and varnish, diameter 125mm
- Rubin - Stickfix sanding discs for wood, diameter 125mm
- Saphir - Stickfix sanding discs for heavy duty operating conditions, diameter 125 mm
- Cristal - Stickfix sanding sheets for course sanding, diameter 125mm
- Viles - Stickfix sanding discs for light sanding, diameter 125mm
- Granat - Stickfix abrasives for fillers, clear coates and hard undercoats, diameter 125mm
-
Eccentric Sanders ETS 150
-
Abrasives for ETS 150
- Titan 2 - Stickfix sanding discs for motor repairs, diameter 150mmdiameter
- Platin 2 - Stickfix sanding discs for fine-sanding, diameter 150mmdiameter
- Viles - Stickfix sanding discs for light sanding, diameter 150mm
- Titan 2 - Stickfix sanding discs for motor repairs, diameter 150mm
- Diamant - Stickfix sanding discs, diameter 150mm
- Brilliant 2 - Stickfix sanding discs for paint and varnish, diameter 150mm
- Cristal - Stickfix sanding sheets for course sanding, diameter 150mm
- Rubin - Stickfix sanding discs for wood, diameter 150mm
- Polishing Pad sand Accessories RO 150
- Saphir - Stickfix sanding discs for heavy duty operating conditions, diameter 150mm
- Granat - Stickfix sanding discs, diameter 150mm
-
Abrasives for ETS 150
-
Finishing Sanders RTS 400, DTS 400, ETS 125
-
ORBITAL RTS 400 Sander
- Granat - Stickfix abrasives for fillers, clear coates and hard undercoats, 80x133mm
- Brilliant 2 - Stickfix abrasives for paint and varnish, 80x133mm
- Rubin - Stickfix abrasives for wood, 80x133mm
- Cristal - Stickfix abrasives for course sanding, 80x133mm
- Viles - Stickfix abrasives for sanding, 80x130mm
-
ECCENTRIC ETS 125 Sander
- Brilliant 2 - Stickfix abrasives for paint and varnish, diameter 125mm
- Rubin - Stickfix abrasives for wood, diameter 125mm
- Cristal - Stickfix abrasives for course sanding, diameter 125mm
- Titan 2 - Stickfix abrasives for motor repairs, diameter 125mm
- Platin 2 - Stickfix abrasives for fine-sanding, diameter 125mm
- Viles - Stickfix abrasives for light sanding, diameter 125mm
- Saphir - Stickfix abrasives for heavy duty operating conditions, diameter 125 mm
- ORBITAL Delta DTS 400 Sander
-
ORBITAL RTS 400 Sander
-
Direct drive orbital sander RS 100, RS 200, RS 300
-
Abrasives for orbital sanders
- Stickfix sandpaper roll for wood, 93x14m
- Stickfix sanding sheets for motor repairs, 115x228mm
- Stickfix sanding sheets for paint and varnish, 115x228mm
- Stickfix sanding sheets for paint and varnish, 93x178mm
- Stickfix sanding sheets for light sanding, 93x175 mm
- Stickfix abrasive sheet for sanding, 115x225mm
- Stickfix sanding sheets for wood, 93x178mm
- Stickfix sanding sheets for wood, 115x228mm
- Accessories for orbital sanders
-
Abrasives for orbital sanders
- Belt Sanders BS 75, BS 105
- DUPLEX Linear Sander
-
Rapid Rotary Sanders
- Sanding pad
- Accessories for rotary sander
-
Abrasives for rotary sander
- Saphir - Stickfix sanding discs for heavy duty operating conditions, diameter 115mm
- Rubin - Stickfix sanding discs for wood, diameter 115mm
- Viles - Stickfix sanding discs for light sanding, diameter 115mm
- Saphir - Stickfix sanding discs for heavy duty operating conditions, diameter 180 mm
- Viles - Stickfix sanding discs for light sanding, diameter 180mm
- Rubin - Stickfix sanding discs for wood, diameter 180 mm
- Brushes for rotary sander
-
DELTEX Triangle Sander
- Brilliant 2 - 93V Stickfix abrasive sheets for paint and varnish
- Rubin - 93V Stickfix abrasive sheets for wood
- Granat - Stickfix abrasives for fillers, clear coates and hard undercoats, diameter 90mm
- Saphir - 93V Stickfix abrasive sheets for heavy duty operating conditions
- Viles - 93V Stickfix sanding cloth for light sanding
- PLANEX Plaster Wall and Ceiling Sander
- Course Eccentric Sander WTS 150/7
- Polishing
-
Pneumatic Sanders
- Abrasives for compressed air eccentric sanders LEX 185
- Sanding pad diameter 125 mm
- Accessories for compressed air orbital sander
- Abrasives for compressed air orbital sanders
- Compressed air materials
- Conversion from IAS to IAS2
- Air tool connections
- Accessories for compressed air eccentric sander LEX 185
- Other abrasives
- Circular Saws on Guide Rails
-
Routing
- Router OF 1010
- Router OF 1400
- Router OF 2200
- Alucolbond/Dibond Milling Machines PF 1200
- Edge trimmer OFK 500
- Laminate trimmers MFK 700 and OFK 700
- Putty router
-
Dovetail/Finger joining System VS 600
- Dovetail Jig Basic Unit (VS 600 GE)
- Hidden/Lapped/Half Blinddiameter Dovetails - Slot size 14 mm, workpiece thickness 14-20
- Hidden/Lapped/Half Blinddiameter Dovetails - Slot size 20 mm, workpiece thickness 21-28
- Slot/Finger joint - Slot size 6 mm, workpiece thickness 6-10 mm
- Slot/Finger joint - Slot size 10 mm, workpiece thickness 10-20 mm
- Dowel joint - dia.13.8 mm
- Open/Through Dovetails - Slot size 14 mm, workpiece thickness 8-14 mm
- Open/Through Dovetails - Slot size 20 mm, workpiece thickness 14-25 mm
- Multi-Routing Template
- SYS 32 - Hole drilling system
-
Cutters (Router Bits)
-
Cutters for working with TIMBER
- Ogee chamfer cutter HW with ball bearing guide
- Mitre tongue and groove cutter with TC shank 12 mm
- Hand rails cutters with TC shank 12 mm
- Stepped cutter with TC shank 12 mm
- Accessories for cutters
- Accessories for Multi Form Plus cutter heads
- Rebating head and spindle with reversible/replaceable blades
- Raised panel (Facing cutters) HW
- Door frame classic profile cutter HW
- Laminate cutter set HW with ball bearing guide
- Router cutter HS single-edged, with base blade
- Spiral router cutter HS with base blade
- Router cutter HW, solid tungsten carbide with base blade
- Router cutter HW with fitted base blade
- Spiral router cutter HW solid tungsten carbide with base blade
- Round nose cutter HW without and with ball bearing guide
- Flute cutter HW
- Dovetail cutter with pre-cutter
- Dovetail cutters
- V-groove cutter
- Script cutter
- Ovolo edge cutter HW
- Ogee cutter HW with ball bearing guide
- Flute cutter HW with ball bearing guide
- Rebating cutter HW with ball bearing guide
- Chamfer cutter HW with ball bearing guide
- Chamfer/edge trimming cutter with ball bearing guide
- Edge trimming cutter HW with ball bearing guide
- Roman ogee cutter HW with ball bearing guide
- Multi-profile cutter HW with ball bearing guide
- Profile cutters HW
- Concealed grip and hand hold cutters HW
- Tongue and groove (finger joint) cutter HW
- Key-hole cutter HW
- Drilling cutter HW
- Disc groove cutters HW
- Dowel drill HW
- Hinge location cutter HW
- Reversible/replaceable blade cutter HW single-edged, with base blade
- Reversible/replaceable blade slot cutter HW with ball bearing guide
- Reversible/replaceable blade chamfer/edge trimming cutter HW with ball bearing guide
- Reversible/replaceable blade rebating cutter with ball bearing guide
- Door frame modern profile cutter HW with ball bearing guide
- Profile cutter radius HW with ball bearing guide
- Half-round cutter HW with ball bearing guide
- 8mm and 12mm Collets to Suit Cutters
- Cutters for working with PLASTERBOARD (V-groove HW)
- Cutters for working with ALUMINIUM
-
Cutters for working with MINERAL MATERIALS and POLYMERS
- Reservoir cutter HW with ball bearing guide
- Spiral groove cutter, TC
- Spiral groove cutter with roughing and finishing, TC
- Edge trimming cutter with ball bearing, bottom
- Chamfer cutter HW
- Chamfer cutter, TC, with undercut
- Classic ogee cutter HW
- Ogee cutter, undercut, TC, with ball bearing
- Chamfer cutter, TC, with ball bearing, top
- Edge trimming cutter with ball bearing, top
- Reversible blade groove cutter HW shaft 8 mm
- Chamfer cutter HW with ball bearing guide
- Carbide-tipped facing cutter
- Turning plate edge trimming cutter HW with ball bearing guide
- Ogee chamfer cutter HW with ball bearing guide
-
Cutters for working with TIMBER
- Routing Aid
- Worktop Template
- Accessories for superseded routers
-
Dust Extraction
- CT-MINI/MIDI Dust Extractors (General / Woodworking)
- CT HEPA Dust Extractors (General / Woodworking)
- CT HEPA Dust Extractors (Higher Risk Materials)
- CT HEPA Dust Extractors (Hazardeous Materials)
- Superseded SR Dust Extractor Accessories
- Superseded CT Dust Extractor Accessories
- Antistatic (AS) hoses and fittings
- Non-antistatic hoses and fittings
- Cleaning sets
- Special nozzles/brushes
- Tubes
- Floor nozzles
- Guide Rail System
- CMS (Compact Module System)
- MFT (Multifunction Table)
-
Cordless Drills
- Build you own: TI-15 IMPACT DRIVER System
- Build you own: T-15 DRILL/DRIVER System
- Build you own: C-15 DRILL/DRIVER System
- FastFix Chucks
- CSX Series (mini-D-handle) Drills
- C Series (D-handle) Drills
- T Series (T-handle) Drills (including Impact Drill/Driver)
- CENTROTEC accessories
- CENTROTEC bits (phillips, pozidriv, torx, slot)
- CENTROTEC drill bits (twist bits and brad-point bits)
- CENTROTEC ZOBO (Forstner style bits)
- Standard bits (phillips, pozidriv, torx, slot)
- Standard drill bits (twist bits)
- Previous models battery packs and chargers
- KAPEX Sliding Compound Mitre Saw
- PRECISIO Table Saws
- Workplace Organisation
- Jigsaws
- Planing
- Cool Stuff
- And more...
- Spare Parts
- Superseded products and/or accessories
- Protool
- Walko
- WSE
- Featured and Specials
-
Festool
- Articles & Discussion
- About
- Contact & Support
All prices include GST.
Copyright 2011 - The content on this site is owned by Ideal Tools and/or its respective owners.
However, feel free to copy content from our site to other sites for NON-COMMERCIAL purposes only.
If you do, please provide a reference link back to our site acknowledging us and our contributors as the source.
Ideal Tools Pty Ltd ABN 80 061 640 293.
Our sitemap.
Loading...