Small is beautiful! Incredible variety in a 0.5m2 workbench with the Compact Module System CMS. For Sawing, Routing, Sanding endless applications. No Compromises! Seen at www.idealtools.com.au The Compact Module System CMS – Incredible variety. The system concept perfected further. + CMS module carrier = CMS module + + Seen at www.idealtools.com.au 2 Many tasks need to be completed to produce a workpiece: trimming boards, sawing shapes, routing chamfers or sanding edges. In this case, it is good to have a complete system instead of having to use a number of individual tools. Festool offers this system – and this on an area of just 0.5 m2. Here, all components in the Compact Module System CMS are coordinated with each other and guarantee best work results. In addition to this, the built-in machines can be used not only as bench-mounted tools, but also as hand-held tools. The machines from Festool are renowned for flexibility and precision in day-to-day work. For example, in the combination of plunge cut saw and guide rail. CMS basic unit The respective machine is quickly and easily inserted into the appropriate module carrier. This creates a module which is simply inserted and clamped in position. Seen at www.idealtools.com.au  Once the module is inserted into the basic unit, you can start working. The hand-held machine has been converted to a benchmounted system. The basic unit of the Compact Module System CMS – the found A workshop does not have to be big. The basic unit forms the basis of the Compact Module System. It is the appropriate and sturdy frame for all modules. Whether sawing, routing or sanding, each module is converted to a bench-mounted system when it is installed in the basic unit. Lightweight and robust. The design and the use of aluminium and magnesium make it possible: the CMS basic unit with a weight of just 10.8 kg is very light - and stable as well. Easy to transport and robust in action. The switch unit. For central switching on and off as well as for easy module changing, the built-in machine is simply plugged directly into the main switch. To ensure safety, the undervoltage protection prevents unintentional switching on after a power cut. Foldaway legs for two working heights. Combined with the CMS basic unit, the foldaway legs are always there when you need them. They are easy to fold out and allow for both rapid assembly and easy transportation. Easy changing of the working height included. Working without leaving a trace. To ensure that the CMS basic unit does not leave annoying black marks on the floor when it is pulled from one position to another, all feet are made of grey rubber. This is ideal when laying parquet and other floor coverings. Also included: an adjusting foot for balancing the unit on uneven floors. Model Basic unit CMS-GE AUS 240V Equipment/Scope of delivery Basic unit for fitting the CMS modules, foldaway legs, safety push button, cable and socket Seen at www.idealtools.com.au  ation on which everything is built. More accuracy with the scale. To ensure that working with the circular saw modules TS 55 and TS 75 is always accurate, this module carrier comes complete with a scale. It is mounted on the CMS basic unit and can be precisely adjusted. Also very suitable for assembly – the lightweight and handy design makes it possible. Easy and quick module changing. The CMS basic unit and the CMS modules are coordinated with each other in such a way that the modules can be easily installed and removed. Simply put the module into the mounting hole and clamp it in place. By the way: all Basis-Plus* modules (except 1 A) can also be used with the Compact Module System. *Basis-Plus = predecessor of the CMS Easy installation and removal and, therefore, faster replacement of the CMS modules. All-round V-groove for accessories. The V-groove on the CMS basic unit makes work easier. It allows for accessories such as angle stops or sliding tables to be simply inserted and securely fixed in place – flexibly and precisely. With its extensive range of accessories, the CMS is easy to extend – for a wide range of applications. Cable holder and workpiece holder bracket. Thanks to the cable holder, the cable is always tidied away and does not become an obstacle for people to trip over. The workpiece holder (comes complete with the respective CMS module carrier for portable circular saws) is kept in the workpiece holder bracket where it is always within reach. Both ensure safe working. Table dimensions, length x width x height (with foldaway legs) 585 x 00 x 16 (900) mm Weight 10.8 kg Order no. 561230 The built-in machines can be used not only as bench-mounted tools, but also as hand-held tools – for flexible working. Seen at www.idealtools.com.au 5 The CMS and plunge-cut saws. Trim, rip, cross and angled cuts with plunge cut saws. Precise cuts Easy angled cuts Versatility and precision. Versatile and precise cuts can be performed without compromises because the convenient cutting height adjustment and the swivel function of the saw blade allow for even complex cuts. And thanks to the sliding table, trim cuts and cross cuts up to 80 mm are possible. The right angle every time. The angle stop can be swivelled 180° and simply inserted on either side. This in combination with the swivel-mounted saw blade even makes it easy to saw mitre cuts. Switching from cross cuts to rip cuts is also done in no time at all. Main applications Strengths and benefits • Precise trim cuts and cross cuts up to 80 mm in length thanks to the sliding table • Quick switching between cross cuts and rip cuts • Angled cuts from 0° to 5° due to inclined position of the saw blade • MMC electronics and variable speed means that many materials can be worked on. • Bench saw for a wide range of applications • FastFix for quick and easy saw blade changing and adaptation to the working material • Plunge cut saws TS 55 and TS 75 can not only be installed, they can also be used portably • Extendable thanks to extensive range of accessories Model 1 2   1 2 Equipment/Scope of delivery Bench saw as a complete set with TS 55 EBQ-Plus, module carrier, basic unit and sliding table; Scope of delivery: TS 55 EBQ-Plus and basic unit, sliding table, module carrier, protective cover with protective cover carrier, securing brackets, cutting height adjustment, switch and spacer wedge clamp, scales, workpiece holder, angle stop WA, operating tool, HW fine-tooth saw blade Z8, Systainer size  Order no. 561276 Bench saw CMS-TS 55 set AUS 240V Module CMS-MOD-TS 55 AUS 240V Module with TS 55 for installing into the basic unit; Scope of delivery: TS 55 EBQ-Plus, module carrier, protective cover with protective cover carrier, securing brackets, cutting height adjustment, switch and spacer wedge clamp, scales, workpiece holder, angle stop WA, operating tool, HW fine-tooth saw blade Z8, Systainer size  561266 2 Seen at www.idealtools.com.au 6 Module carrier CMS-TS 55 Module carrier for installing the TS 55 into the basic unit; Scope of delivery: module carrier, protective cover with protective cover carrier, securing brackets, cutting height adjustment, switch and spacer wedge clamp, scales, workpiece holder, angle stop WA 493359 High level of safety Extremely flexible Better safe than sorry. The protective cover on the TS 55 and TS 75 modules is transparent for a clear view of the workpiece and the cut. The spacer wedge ensures even more safety. It prevents the workpiece from jamming, therefore preventing any recoil this would cause. Stationary or mobile. Many applications and many possibilities - because the plunge cut saws are quickly disassembled, you can have both stationary saw power on the CMS or mobile sawing on the guide rail. This wide range of applications pays off. Technical Data CMS-TS 55 / TS 75 CMS-TS 55 2 1   CMS-TS 75 1600 W 150 - 550 rpm 1 - 71 mm (75 mm) 1 - 8 mm (55 mm) from 0° to 7° 80 mm Rated power Speed Cutting depth Cutting depth at 5° Inclined position Max. cross cuts with sliding table Rip cuts on left/right from saw blade Saw blade diameter Dimensions of module carrier Table dimensions, length x width x height Connection for dust extraction Weight of module carrier Total weight (GE + MOD + ST + TS, without angle stop) 1200 W 2000 - 5200 rpm 0 - 51 mm (55 mm) 0 - 8 mm ( mm) from 0° to 5° 2 mm (85 with ST*)/166 mm (576 with VB**) 160 mm 210 mm 578 x 20 mm 585 x 00 x 16 (900) mm D 27/6 mm . kg 2. kg 25.2 kg *Sliding table ST **Table widener VB ELECTRONIC Model 1 2 Equipment/Scope of delivery Module with TS 75 as bench saw module; Scope of delivery: TS 75 EBQ-Plus, module carrier, protective cover with protective cover carrier, securing brackets, cutting height adjustment, switch and spacer wedge clamp, scales, workpiece holder, angle stop WA, operating tool, HW universal saw blade Z2, Systainer size 5 Module carrier for installing the TS 75 into the basic unit; Scope of delivery: module carrier, protective cover with protective cover carrier, securing brackets, cutting height adjustment, switch and spacer wedge clamp, scales, workpiece holder, angle stop WA Order no. 561271 Module CMS-MOD-TS 75 AUS 240V (available as of March 2006) Module carrier CMS-TS 75 (available as of March 2006) 2 493360 Module carrier for pendulum cover saws, see Page 1 Seen at www.idealtools.com.au 7 The CMS and jigsaws. Sawing shapes and curves with jigsaws. High precision High quality Precise and convenient. Always saw along the score line. To make sure that every cut is made perfectly, the jigsaw PS 00 has a three-way saw blade guide. This ensures sawing at accurate angles. And to enable you to easily follow every cut, you are provided with a clear view of the sawing line. Splinter-free and clean. The splinterguard and precise saw blade guide allow for splinter-free cuts on both sides with the jigsaw module of the CMS. This removes the need for reworking. And the integrated dust extraction ensures clean working. Main applications 1 • Sawing shapes exactly along the score line • Precise coping during trimming work • Cutting curves easily, safely and precisely • Preliminary cutting work prior to routing shapes 2 Strengths and benefits • Safe three-way saw blade guide for precision work • MMC electronics for variable speed and adaptation to the working material • Dust extraction for clean and healthy working conditions • Jigsaw PS 00 is easy to remove and can be guided by hand, giving more flexibility • Splinterguard for splinter-free cuts ELECTRONIC Technical Data CMS-PS 00 Rated power Speed Max. cutting depth Inclined position Dimensions of module carrier Connection for dust extraction Weight of module carrier Weight of PS 00 Total weight 720 W 1000-2900 rpm 120 mm 0–5° 578 x 20 mm D 27 mm . kg 2. kg 5.7 kg Model 1 2 2 Equipment/Scope of delivery Module carrier with PS 00 as jigsaw module; Scope of delivery: PS 00 EBQ-Plus, module carrier, mounting brackets, operating tool, 2 saw blades, 1 splinterguard, Systainer size 1 Module carrier for installing the PS 200, PS 00 or PSB 00 into the basic unit; Scope of delivery: module carrier, mounting brackets, operating tool Order no. 561263 Module CMS-MOD PS 300 Seen at www.idealtools.com.au 8 Module carrier CMS-PS 200/PS 300 561262 The CMS and routers. Routing rebates, profiles and shapes with routers. Great results High precision Precise and clean. The router stop on the router modules allows for clean and precise working – thanks to safe and stable guidance, even when working on small workpieces. And the connection for a mobile dust extractor allows for dust-free working. Versatility and precision. Due to the accessories and router tools that can be used differently, all kinds of routing work can be completed with ease, eg precisely guided routing work on the front face of the workpiece using the sliding table. Main applications 1 • All kinds of routing work: routing rebates, recesses, curves and shapes • Routing shapes and curves at the ball bearing guide • Jointing work at the stop ELECTRONIC 2 Strengths and benefits • Accurate routing depth setting with spindle • Fine-adjustment stop with extraction connector and press-down fixture • Dual extraction connector • Router is easy to remove and can be guided by hand Technical Data CMS-OF 1010 and CMS-OF 100/2000 CMS-OF 1010 Rated power Speed Holder for shank cutter Weight of OF 1010 Max. routing diameter Dimensions of module carrier Connection for dust extraction Weight of module carrier with router stop Total weight 11 kg 12.8 kg Order no. 570245 1010 W 10000-2000 rpm 8 mm 2. kg 51 mm CMS-OF 100/2000 OF 100/2000 not included in the scope of delivery. Technical Data at www.festool.com 70 mm 578 x 20 mm D 27/6 mm 8. kg Model 1 2 Equipment/Scope of delivery Module with OF 1010 for installing into the basic unit; Scope of delivery: OF 1010 EBQ-Plus, module carrier, router stop, press-down fixture, mounting brackets, operating tool, clamping collet diameter 8 mm, side stop, guide rail adapter, chip deflector, operating tool, Systainer size  Module carrier for installing the OF 1010 into the basic unit; Scope of delivery: module carrier, router stop, press-down fixture, mounting brackets Module carrier for installing the OF 100 or OF 2000 into the basic unit; Scope of delivery: module carrier, router stop, press-down fixture, mounting brackets Module CMS-MOD-OF 1010 2 Module carrier CMS-OF 1010 Module carrier CMS-OF 1400/OF 2000 570243 570246 9 Seen at www.idealtools.com.au 2 The CMS and belt sanders. Sanding edges, shapes and chamfers with the belt sander. High economic efficiency High level of convenience For large sanding capacities. Thanks to the large sanding area and the powerful drive, all kinds of sanding work are easy to do. Even trimming work can be performed cleanly and quickly thanks to the angle stop. Flexible for all curves. When sanding different curves, the sanding drum can be simply replaced with two other versions from the range of accessories. This gives you more variety in the application. Changing the sanding belt is also quick and easy. Main applications 1 • Simple, accurate sanding • Quick and easy edge sanding • Sanding recesses and curves • Sanding sloping surfaces and angles at the angle stop • Easy deburring and finishing work on diverse materials Strengths and benefits CMS-BS 120 Rated power Speed Dimensions of module carrier Belt length x belt width Sanding area Connection for dust extraction Total weight 550 W 2800 rpm 578 x 20 mm 820 x 120 mm 185 x 115 mm D 27 mm 20 kg • Abililty to lower the sanding belt, giving full belt utilisation and achieving greater efficiency • Quick, simple belt changing – short changeover times • Tilting sanding belt for sanding chamfers and sloping surfaces with ease Model 1 Equipment/Scope of delivery Belt sander module with built-in motor; Scope of delivery: belt sander module, dust extraction hood, connection hose, 1 sanding belt, angle stop WA Order no. 570244 Seen at www.idealtools.com.au 10 Module CMS-MOD BS 120 AUS 240V The CMS with Basis-Plus System and CS 50. The system in the system. CMS and Basis-Plus System There are many new elements to the Compact Module System CMS, but not everything has changed. For example, the modules in the established Basis-Plus System (except for the Basis 1 A module) can be used with the new basic unit of the CMS. Of course, the new modules of the TS 55 and TS 75 can also be used in the Basis-Plus. Retrofitting the Basis-Plus with the TS 55 is achieved by simply using the sliding table SAS 500 (see Page 1). + Basis-Plus basic unit Module carrier for TS 55 or TS 75 + Sliding table SAS 500 CMS and PRECISIO CS 50 The impressive cutting path of 0 mm on the CS 50 means you can easily trim boards up to approx. 00 mm wide at 90° and up to 200 mm wide at 5°. The external dimensions of the CMS basic unit are also identical to the all-round V-groove with the CS 50. This means that the same accessories can be used on both tools, saving on double initial costs. Since the working heights of CS 50 and CMS are also identical, the CS 50 supplements the universal system as an ideal bench-mounted trimming saw. You can download the brochure for the PRECISIO CS 50 at www.festool.com.au IPT – Interactive Product Tour With the Interactive Product Tour, you can experience all of the possibilities and advantages of the Compact Module System: applications, product features, accessories. Pictures, films and texts immerse you in the world of the CMS, whenever you have the time and whenever you feel like it. You can obtain the application CD ROM free of charge by requesting it on the Festool Homepage or from your Festool specialist dealer. Seen at www.idealtools.com.au 11 CMS accessories. System overview and accessories  1 6 7  2 5 11 12 1 9 10 8 1 Accessories for Compact Module System CMS Product 1 Explanation Convenient sliding table; quick and easy attachment and removal; two securing positions; max. cutting length for cross cuts 80 mm; for CMS and CS 50 Angle stop that can be swivelled 180° and used from all sides; for working with 2 stops; for CMS and CS 50 For stopping workpieces on the angle stop WA and Basis WRA 500 For supporting long workpieces when rip cutting; quick and easy attachment; fold-away; extends support surface by 00 mm; for CMS and CS 50 The fully insertable support can be used on both sides and supports workpieces when cross-cutting; for CMS and CS 50 For safe and precise sawing to width; adjustable scales; quick and easy attachment and removal; max. cutting width 550 mm (with longitudinal stop) 576 mm (with angle stop); for CMS With fine adjustment and rear clamp; can be used from front; with moveable stop profile for precise and safe rip cuts; for CMS and CS 50 For storing 2 to  saw blades (max. diameter 190 mm) and  splinterguards; is hung between the foldaway legs of the CMS or the CS 50 EB, contents not included; for CMS and CS 50 For supporting long workpieces when rip and cross-cutting; can be used with CMS, CS 50 EB, CS 70 EB, Basis-Plus System and MFT Hose set for double extraction of the CMS, CS 50, CS 70, Basis 1 A, Basis 2 A, Basis 5 A and Basis 6 A; included in the scope of delivery of the CS 50 EB and CS 70 EB Cutter spindle for inserting the rebating head 8928 into the CMS and the Basis; compatible with OF 100 or OF 2000; Scope of delivery: cutter spindle, locking unit, retaining screw Rebating head with reversible blades; for rebating or jointing in conjunction with the router stop; for bench-mounted use in the router modules of the CMS and the Basis; only to be used in combination with the appropriate cutter spindle (9011 or 89285); Technical Data: diameter 50 mm, height 0 mm Replacement reversible blades for rebating head FK D 50x0; Scope of delivery: 2 reversible blades,  retaining screws Cutter spindle for inserting the rebating head 8928 into the CMS or the Basis; compatible with OF 900, OF 1000 and OF 1010; Scope of delivery: cutter spindle, locking nut, retaining screw Order no. 492100 488451 491712 492092 492242 493822 Sliding table ST Angle stop WA Stop flag AR-WA Extension table VL Support AF Extension table VB-CMS Longitudinal stop LA Saw blade holder SGA 2   5 6 7 492095 492228 8 9 Roller stand RB Extractor set AB Cutter spindle ASL20/ OF 1400/2000 Rebating head FK D 50x30 488711 488292 490131 10 11 12 489284 1 Reversible blades WP 30x12x1.5 Cutter spindle ASL20/ OF 1010 489286 489285 1 Seen at www.idealtools.com.au 12 System overview and accessories CMS with belt sander module 1 2 7 Pendulum cover saws and plunge cut saw AT   Basis-Plus 5 6 Accessories for Compact Module System CMS Product 1 Explanation for CMS-MOD-BS 120; sanding drum for replacing the standard sanding drum; different diameters for corresponding curves; Scope of delivery: sanding drum, blanking plate, protective shape plate; diameter 55 mm for CMS–MOD-BS 120; sanding drum for replacing the standard sanding drum; different diameters for corresponding curves; Scope of delivery: sanding drum, blanking plate, protective shape plate; diameter 105 mm (820 x 120 mm), grit: P 50, quantity in pack: 10 (820 x 120 mm), grit: P 80, quantity in pack: 10 (820 x 120 mm), grit: P 100, quantity in pack: 10 (820 x 120 mm), grit: P 120, quantity in pack: 10 (820 x 120 mm), grit: P 150, quantity in pack: 10 (820 x 120 mm), grit: P 180, quantity in pack: 10 Module carrier for installing the AT 65, AP 55, AP 65, AP 85 into the basic unit; installation only possible in conjunction with the appropriate assembly kit (other accessory), no scales are available for the module carrier CMS-AP/AT; Technical Data: dimensions of the plate 578 x 20 mm, weight .0 kg; Scope of delivery: module carrier plate, workpiece holder, angle stop WA For installing portable circular saws into module carrier CMS-AP/AT; for AP 85 For installing portable circular saws into module carrier CMS-AP/AT; for AP 65 For installing portable circular saws into module carrier CMS-AP/AT; for AT 65 For installing portable circular saws into module carrier CMS-AP/AT; for AP 55 Module carrier for installing the TS 55 into the basic unit; appropriate for Basis-Plus; Technical Data: cutting depth 0-51 mm; dimensions of the plate 578 x 20 mm; weight . kg; Scope of delivery: module carrier plate, protective cover with protective cover carrier, securing brackets, cutting height adjustment, switch and spacer wedge clamp, workpiece holder, angle stop WRA 500 Can be used with Basis-Plus, sliding path 500 mm For space-saving storage of up to  modules; alternatively, 2 Systainers can be accommodated in each slot; the slot height can be adjusted; there are 5 slots; of the  rollers, 2 are fixed and 2 are swivel-mounted with a brake; width 60 mm; depth 600 mm; height 1600 cm; weight 1 kg Order no. 488032 Sanding drum CW D55 x 120 Sanding drum CW D105 x 120 Sanding belt Compact CMB 120 Sanding belt Compact CMB 120 Sanding belt Compact CMB 120 Sanding belt Compact CMB 120 Sanding belt Compact CMB 120 Sanding belt Compact CMB 120 488031 2 488081 488082 488083 488084 488085 488086 493956  Module carrier CMS-AP/AT  Assembly kit BS 85 Assembly kit BS 65 Assembly kit BS 65T Assembly kit BS 55 486168 486167 486745 486166 493955 5 Module carrier Basis-TS 55 6 7 Sliding stop SAS 500 Module tower MT 489673 451975 Seen at www.idealtools.com.au 1 www.festool.com.au Your link to more information… News and promotions Online product catalogue Online shop Dealer search Test reports Service Application examples D animations On the Festool site you can find information about • • • • • new products helpful application examples our comprehensive after-sales service the complete product range product features in detail And all of this at your leisure. Order around the clock from your Festool System Partner Dealer. It‘s easy: just visit www.festool.com.au www.festool.com.au TTS Tooltechnic Systems (AUST) P/L 6-65 Quantum Close/PO Box 01 Dandenong VIC 175/16 Phone: 0 9799 97 Fax: 0 9766 9766 Service Hotline: 1800 06 900 E-mail: festool@festool.com.au New Zealand Eurotooltechnic Limited 26 Greenmount Drive East Tamaki Auckland New Zealand Phone: 6 9 272 2220 Fax: 6 9 272 220 E-mail: sales@tooltechnic.co.nz www.festool.co.nz Festool grants a 1 year guarantee from the date of purchase, as long as the tool has been used correctly. This guarantee is automatically extended by a further two years, provided that the warranty form with every new tool is completed correctly and returned to Festool Australia within 0 days of the date of purchase. Art-Nr. 057991 Dealer Seen at www.idealtools.com.au Subject to alterations and errors. All illustrations are non-binding. Created for TTS Tooltechnic Systems AG & Co. KG, DE - 720 Wendlingen, 10/2005 Three years guarantee – that means three years security.