TITEBOND Glues and Adhesives

The Titebond series was the first aliphatic resin adhesive, developed 35 years ago. It has set the standards by which other glues are measured today. Titebond has the following properties:

Excellent creep resistance
Superior solvent resistance
Excellent bond strength
Excellent resistance to heat
Available in varying speeds of set
Excess glue will not clog your abrasive belts

Product	Type	Strength (psi)	Min Temp	Dried film	Clean up	Speed of set (Relative to other Titebond glues, the greater the number the faster the set.)	Open/Closed assembly time (mins)	Moisture resistance
Titebond Original	Aliphatic Resin	3,600	10°C	Light Yellow	Water when wet, sand when dry.	1.37	5/10	Internal use
Titebond II Premium	Crosslinking PVA	3,750	13°C	Light Yellow	Water when wet, sand when dry.	1.26	5/10	D3, E-1, ANSI Type 2 Weatherproof
Titebond III Ultimate	Proprietary Polymer	4,000	8°C	Light Brown	Water when wet, sand when dry.	1.00	10/15	ANSI Type1 BOIL-TEST Waterproof
Titebond Polyurethane	Polyurethane	3,510	10°C	Tan	Mineral spirits when wet, sand or scrape when dry.	-	20 total	D4, E-1, ANSI Type 1

Titebond Instant Bond takes between 5 – 15 seconds to set and 30 – 60 seconds for initial cure. It provides a strong, permanent bond and is ideal for hard to reach joints or surface areas that are difficult to clamp. Designed primarily for wood and wood products, this adhesive is also very effective on a wide variety of materials and substrates.

Product	Type	Viscosity	Gap Fill	Assembly Time (seconds)	Cure Speed	MIMIL Specs (A46050C)
Titebond Instant Bond - Thin	Cyanoacrylate	5 cps	0.002	5 seconds	3 seconds/24 hours	Type II, Class 1
Titebond Instant Bond - Thick	Cyanoacrylate	2400 cpstd>	0.008	10 seconds	8 seconds/24 hours	Type II, Class 3

Products Categories

	Titebond Original (Internal) Titebond Original is the fastest setting, high-quality aliphatic resin emulsion adhesive. It dries very rapidly to give a short clamp time and has high solvent-resistance. Original is excellent for sandable general purpose assembly for particle board, MDF, plywood and other porous materials as well as edge and face gluing of hardwoods and softwoods. It is preferred by musical instrument makers around the world.		Titebond II Premium (Weatherproof) A shelf stable, one part (pre-catalysed) cross-linking PVA adhesive. It is recommended for high frequency and hot or cold press, edge and face gluing and finger joint applications. With its very fast setting rate, viscosity stability and high percentage solids, Titebond Premium II can also be used for a variety of assembly gluing applications. It develops a DIN EN 204 D3 water-resistant bond with a light-coloured glue line.		Titebond Instant Bond Wood Adhesive (Cyanoacrylate) "SuperGlue for Wood" Although the core Titebond Wood Glue product line is ideal for a vast majority of woodworking applications, there is a growing need for faster, and in some cases “instant”, adhesion capabilities. For this reason, Titebond now offer the Titebond Instant Bond line of ethyl-cyanoacrylate-based wood adhesives. Titebond Instant Bond takes between 5 – 15 seconds to set and 30 – 60 seconds for initial cure. It provides a strong, permanent bond and is ideal for hard to reach joints or surface areas that are difficult to clamp. Designed primarily for wood and wood products, this adhesive is also very effective on a wide variety of materials and substrates.
	Titebond III Ultimate (Waterproof) Titebond III is the most advanced wood glue available today. While all Titebond products provide superior performance, Titebond III is especially useful for outdoor applications in cooler temperatures or when concern for substantial moisture calls for the use of a Type I glue (USA boil test). For interior applications, the longer working time of Titebond III provides woodworkers the necessary latitude to ensure that substrates are precisely aligned before being bonded. Overall, Titebond III combines superior strength, sandability with water cleanup the ease of use of aliphatic resins with the, durability and water resistance of polyurethanes into one easy-to-use formulation.		Frequently Asked Questions about Titebond I, II, and III For common questions by users of Titebond I, II, and III.		Titebond Polyurethane Titebond Polyurethane glue is a breakthrough in adhesive technology. It is the only polyurethane glue to combine a long 20 minute working time with a short 45 minute clamp time. It is a versatile, professional-strength glue specifically formulated for multi-purpose applications. In addition to its superior wood-to-wood performance, Titebond Polyurethane glue is ideal for metals, ceramics, most plastics, HPL, CorainTM, stone and other porous/non-porous materials. It is ready-to-use, offers excellent sandability and is unaffected by finishes.

TITEBOND Glues and Adhesives

Sort by: Default

| Price | Name | Manufacturer | Code

Titebond WORKSHOP PACK: A handy selection of Titebond Glues and Adhesives (COMBO-1)
	Special Offer: Stock up on the full range of Titebond glue and adhesives and save. Price: $143.00 Special Price: $123.00 You Save: $20.00 (14%) Points Price: 123.0 Earn Reward Points: 3.7 Code: TBO-Combo-1 Manufacturer Code: Combo-1 Qty: Add to Cart View Cart
Includes: 1 x bottle of Titebond Original (473 ml) 1 x bottle of Titebond II Premium (473 ml) 1 x bottle of Titebond III Ultimate (473 ml) 1 x bottle of Titebond Polyurethane (355 ml) 1 x bottle of Titebond Instant Bond - Thin (60 ml) 1 x bottle of Titebond Instant Bond - Thick (60 ml) read more...