Surface clamps fit into holes of the bamboo table tops.

The Cam Clamps are a handy item designed to be used with the holes on the Tabletops. The clamps are comprised of 1 cam levered side, and a stationary dogged side. These clamps allow you to clamp the most awkward work pieces.

Heavy duty workstruts fits into frames. Struts fold up and down as required.

Work struts provide accessibility to work pieces that do not require the table tops or other work surface. You can set the work strut at any desired height on the frame. Work struts are the ideal accessory to store work, or materials whilst working on something else.

Provide extra mobility to the WALKO frame. The casters are attached to the side of the WALKO frame. When you need to transport the WALKO , turn it on its side and roll it out of the trailer or around the shop.

To store and use a WALKO in a limited space.

Wall mounts provide extra support for applications that require you to place the WALKO frame upright against the wall or partition. Wall mounts are ideal for both workshop and on site applications; simply lift the frame out of the Wall Mounts to disengage.

Replacement table top platters (Bamboo).

The Bamboo Tabletops are water-resistant (max. 24 hours), and provide 20mm “dog holes” for unlimited variations of clamping capabilities, plenty of free work space, and with the WALKO Table Support, can be affixed to any part of the frame. The bolts that attach the Tabletops to the Table Supports are recessed 25mm to give plenty of room to set your Plunge-Cut Circular Saw to a comfortable depth.

Replacement table top platters (Bamboo).

The Bamboo Tabletops are water-resistant (max. 24 hours), and provide 20mm “dog holes” for unlimited variations of clamping capabilities, plenty of free work space, and with the WALKO Table Support, can be affixed to any part of the frame. The bolts that attach the Tabletops to the Table Supports are recessed 25mm to give plenty of room to set your Plunge-Cut Circular Saw to a comfortable depth.

Supports for standard or self made table tops.

Table supports allow you to affix the bamboo tops to the WALKO Frame. Four Bolts and you are ready to put your table tops on the WALKO. Table supports have 3 positions. Engage the locks by pressing the lever all the way down and you are in a locked position. As you move the lever up, you will feel a detent in the mechanism, this allows you to angle the table so it becomes 90 degrees to the frame. By moving the lever all the way up, you disengage the locking mechanism, and you now can take the tables off the WALKO frame or move it freely to the desired height.

Supports for standard or self made table tops.

Table supports allow you to affix the bamboo tops to the WALKO Frame. Four Bolts and you are ready to put your table tops on the WALKO. Table supports have 3 positions. Engage the locks by pressing the lever all the way down and you are in a locked position. As you move the lever up, you will feel a detent in the mechanism, this allows you to angle the table so it becomes 90 degrees to the frame. By moving the lever all the way up, you disengage the locking mechanism, and you now can take the tables off the WALKO frame or move it freely to the desired height.