2 sided planer DH-410

$2000 OFF DH410


DH-410 - planes up to 410mm x 230mm.


Planes tongue and groove, mouldings, flooring and paneling.


Large selection of profile cutters, tools and knives.

In just two passes, the DH-410 does the same job as the 4-cutter – at a lower price!

If you are on a budget, you can achieve the same results of our PH260 four sider, but with LOGOSOL's DH410 two sider - but in two passes instead of just one.

The DH410 is a great way to get the functionality out of our PH260 four sided planer/moulder, but with only two heads in the DH410 you run the timber through twice instead of just he one.

The variable feed speed of 2 to 12 meters per minute is perfect for both hardwood and softwood species.

  • 2-sided machining: to 325mm W and 110mm H.
  • Planing: to 410mm W and to 260mm H.
  • Variable feed speed: 2 to 12 meters per minute.
  • Power: Up to 6.2kW total (all cutter motors and feed motor).

A great solution if you want advanced machining on a budget.

The NEW DH410 Model 2 has a number of improvements bringing closer to the specification and format of the PH260.

Including the following improvements:

  • New design
  • Extended planing length with standard in-feed tables
  • Better in-feed guidance
  • Easier adjustment of fences
  • Chip outlet for top cutter is 125 mm in  diameter and has a new design.
  • 20 mm top cutter profile depth
  • Stronger bearing in top cutter


Refine selection by category