JUPITER THE MULTI-FUNCTION MULTIMETER FOR ELECTRICAL INSTALLATION SAFETY TESTING

HT ITALIA revolutionises the portable instrument market by introducing the new JUPITER.

The first multimeter who incorporates the functions available only in standard electrical safety testers and professional High-end multimeters.

• Test tripping time of RCDs type A and AC up to 300mA*.
• Tripping current of RCDs type AC up to 30mA.
• Non-trip earth ground resistance.
• Line-to-Neutral, Line-to-Line and Line-to-Ground impedance (resolution 0.1Ohm) with prospective short-circuit/fault current calculation.
• Current up to 3000A by means of clamp-on or flexible external transducer. ›
• Dynamic inrush current of motors and loads through the DIRC function allowing time base selection. ›
• Leakage current by means of the clamp-on transducer HT96U.
• Voltage and current harmonics with THD% calculation and function to the 25th Harmonic (Higher Harmonic Ordering) showing highest harmonic values first.
• One-lead phase sequence detection
• JUPITER is provided with ISO9000 calibration certificate as standard.

Key features.

 * With suitable clamp meter. See below for clamp meters.

Ratings, warranty and support.

 Documents to download.

As professional multimeter HT ITALIA JUPITER Multi-Function Multimeter provides:

• Autorange measurements with automatic AC/DC detection.
• LoZ low impedance voltage input to eliminate ghost voltage readings (caused by the capacitive coupling among active conductors close each other).
• One-lead phase sequence detection.

JUPITER is provided with ISO9000 calibration certificate as standard.

Features.

• Autorange measurements with automatic AC/DC detection.
• DC, AC TRMS, AC+DC TRMS voltage up to 690V.
• Tripping time of RCDs type A and AC up to 300mA*.
• Tripping current of RCDs type AC up to 30mA. ›
• Non-trip earth ground resistance. ›
• Line-to-Neutral, Line-to-Line and Line-to-Ground impedance (resolution 0.1Ohm) with prospective short-circuit/fault current calculation.
• Current up to 3000A by means of clamp-on or flexible external transducer.
• Dynamic inrush current of motors and loads through the DIRC function allowing time base
  selection.
• Leakage current by means of the clamp-on transducer HT96U.
• Voltage and current harmonics with THD% calculation and function to the 25th Harmonic showing highest harmonic values first.
• One-lead phase sequence detection.
• Low impedance voltage input to eliminate ghost voltage readings.
• DC, AC TRMS, AC+DC TRMS current by means of external transducer.
• Frequency of voltage and/or current.
• Resistance and continuity with buzzer.
• MIN/MAX/PEAK/HOLD functions.

Functions.

• TRMS
• AC/DC voltage — 690V / AC+DC
• LoZ Input
• AC/DC current — AC+DC with external clamp transducer
• Frequency
• Resistance and continuity test with buzzer
• RCD tripping time — 30mA, 100mA, 300mA A/AC
• RCD trip current measurement — RCD A/AC 30mA
• Leakage current (with optional accessory HT96U)
• Non-trip earth resistance
• Voltage and current harmonics up to the 25th and THD%
• Loop impedance P-N, P-P, P-PE and calculation of prospective short-circuit current
• Electric motor starting current (INRUSH)
• Auto x1/2, x1, x2, x5, 0°, 180°
• Phase sequence
• Out come OK/NOT OK — According with IEC60364-6
• Backlit LCD display
• MAX/MIN/HOLD
• Bargraph

 

Standard accessories included with JUPITER:  • C2033AU Three wire cable Red, Black, Green with Australian plug • 4324-2 Pair of test tips Red/Black 2/4mm straight banana • YABAT0001HT0 Alkaline battery 1.5V, type AAA, IEC LR03, 4 pcs • YABRS0002HT0 Carrying bag • YAMUM0066HT0 User manual on CD-ROM • YAMUM0065HT0 Quick reference guide • Calibration certificate ISO9000.

Optional accessories: • F3000U AC flexible clamp with 30/300/3000A full scales • HT96U* AC current clamp with 1/100/1000A full scales • HT97U* AC current clamp with 10/100/1000A AC full scales • HT98U* DC current clamp with 1000A full scale • HT4006 AC/DC current clamp with 40/400A full scales • NOCANBA Hypertac-to-banana adapter* Adapter NOCANBA required.