Replaces 5 instruments with 12 tests in one instrument. Installation testing to AS/NZS3000 and AS/NZS3017. New “sockets in seconds” test with single push button and without trailing lead. Preset and user defined Pass/Fail limits.
- Multifunction Installation Tester
- Datalogging of test results and report generation
- Tests Sockets Without Trailing Lead
- Pass/Fail Indication
The InstalTest COMBO is a new multifunction installation tester, replacing a multimeter, insulation tester, RCD tester, loop impedance tester and phase sequence tester in a single portable instrument.
It provides 9 tests, more than any other comparable tester, provides Pass/Fail indication for installation verification and compliance testing, and tests sockets in seconds without a trailing lead.
Frequency 0 – 499.9Hz
Continuity 200mA for earth resistance and equipotential bonding
Insulation Resistance 50V to 1000V, 0.01Mohn to 200Mohm
RCD Testing trip time and trip current, 10mA, 30mA … 1000mA, and with 0o or 180o starting polarity
Fault Loop Impedance
Socket Test earth continuity, polarity and correct connections tests with a single push button and with Pass/Fail indication without trailing leads
Overvoltage Category 600V CAT III and 300V CAT IV
Includes mains measuring cable, 3 x test leads, 3 x test probes, 3 x crocodile clips, 5ohm and 10ohm resistor box for socket test, AC adaptor and NiMH rechargeable batteries
No products were found matching your selection.