The TORMEK T-8 maximises the precision thanks to the revolutionary fully cast housing which guarantees minimal play for the Universal Support. This gives you the best conditions possible to succeed with your sharpening. Tormek’s unique drive system is efficient and manages to hold a constant speed, even under full load. The Tormek Original Grindstone sharpens all qualities of steel, including HSS. The machine features a number of elaborated details, like instant stone locking with EzyLock, water trough with lift and a removable magnet scraper for efficient cleansing.
Grindstone: Tormek Original, Aluminium oxide, 250×50 mm 90 rpm, torque 14.7 Nm.
Honing Wheel: Leather 220×31 mm.
Main Shaft: Stainless steel main shaft, stone hardware and EzyLock.
Housing: Zinc cast top and frame. Sides in ABS plastic.
Motor: Industrial single phase, 200 W (input) 230 V, 50 Hz.
Continuous duty, Maintenance free. Silent running, 54 dB. 25,000 hour life.
Dimensions: W 270, D 270, H 330 mm. Weight: Machine 14.8 kg.
Warranty: 7 year warranty.
On the new T-8 model, Tormek has integrated the previous mounted sleeves for the Universal Support into the fully cast housing for minimal play; an innovation which improves the control of the sharpening and increases the accuracy of the final results.
With an updated design and several other upgraded details.
The Advanced Water Trough has been further improved with a screw lift for an easier fitting and a magnetic scraper for efficient cleansing.
For long tools that drip water over the edge of the lip (like chef’s knives and planer blades), you can add the water chute. Set the widest edge of the chute onto the tab in the middle of the lip of the trough and the water chute will direct the water back into the trough from even the longest tools.
The removable scraper incorporates a strong magnet, which attracts the steel particles ground from the tools being sharpened. This keeps your stone clean and cutting more freely. These small steel particles would otherwise be pressed into the stone surface and can affect the sharpening. When you clean the water trough, you’ll find that most of the steel will be located on the magnet. When you remove the scraper, the magnet will release the steel particles and you can easily clean the trough
Included with the T-8 model is:
Tormek T-8 Original Sharpening System with SG-250 Grindstone, leather honing wheel and US-105 universal support. Includes: SE-77 Square Edge Jig, WM-200 AngleMaster, PA-70 Honing Compound, HB-10 Handbook, Tormek DVD, SP-650 Stone Grader & TT-50 Truing Tool.
Tormek T-4 Sharpening System with SG-200 Grindstone, leather honing wheel and US-103 Universal Support. Includes: WM-200 AngleMaster, PA-70 Honing Compound, HB-10 Handbook, Tormek DVD.
Profile Knife Jig – For profiled paint remover blades and all makes and shapes of profile knives with 24, 30 or 38mm distance between guide holes. Not suitable for knives without guide holes.
Jig for gouges and turning cutters – For fingernail shaped turning gouges. Bent carving gouges and V tools. Max tool width 36mm. Also for turning cutters.
Stainless Steel Main Shaft with hardware and bearings to suit T-7/2006 with EzyLock
- The Tormek MB-100 Multi base used in conjunction with the Tormek Diamond Wheels now allows you to now get a completely flat bevel that is preferable in some applications.
- It has an adjustment line that allows you to fix the sharpening position based on the optimal setting for each tool and jig.
- It can be mounted to the machine either vertically or horizontally.
New, patented design. For plane irons and wood chisels. Aligns a wood chisel automatically parallel to the Universal Support. Safety stops prevent the tool from slipping off the stone and hurt your knuckles. Max tool width 76mm. Max tool thickness 9mm.