Outstanding light output with twelve high-power LEDs
Internal battery to ensure maximum readiness for use.
Festool battery packs can be added on for even longer burn time.
Extremely wide beam angle of 170°.
The Seneca Woodworking Dock Plate XL is an accessory that makes the repeated mortising of small pieces such as trim pieces or face frames quick and effortless. It attaches to both the Festool Domino DF 500 and Domino XL df 700. Workpieces can be located with repeatable accuracy using the adjustable stop, which can be installed in three locations on the plate. Two locations for a Kreg Automax Bench Clamp allow easy left-hand or right-hand operation of the clamp. The Dock Plate XL will save you time and money by speeding up your workflow for mortising small parts.
The Seneca Woodworking Domiplate™ is a fixed fence solution designed for the Festool Domino DF 500 mortising tool. It allows quick adjustment for the repeatable mortising of 12mm or 18mm nominal plywood simply by turning the plate over. The Domiplate is a fixed fence that eliminates the possibility of fence drift, saving time and money due to misaligned mortises.
The Seneca Woodworking 10mm Domi-Shim™ is a machined aluminium shim that attaches to the fence on the Festool Domino XL DF 700 and allows centering on narrower stock than was previously possible. This shim allows the Domino XL fence to adjust all the way to the cutter centreline, allowing centering on material thinner than the Domino XL fence's lower travel limit would previously allow. This shim is an exact 10mm in thickness, designed for use with the METRIC fence height gauge that comes with the Domino XL.
The Seneca Woodworking Dock Plate Stop works with our Dock Plate XL to accurately locate your workpiece for mortising. The Dock Plate XL can be used with up to three stops at a time (one is normally included with the Dock Plate XL).