Construction circular saw HK-55

Showing 1–20 of 39 results

{{block type=”cms/block” block_id=”cat-slide-hk55″}}

A construction site saw with both pendulum blade and plunge saw action.

Convenient and safe with the hinged cover. For easy sawing and a clear view of the saw blade, just press the lever on the front handle. And just like that, the hinged cover releases the saw blade.

Plus plunge-sawing. Similar to the TS-55 plunge saws, the HK-55 can also be used as a plunge saw for the best of both worlds.

Scribe mark = cut. Precision work, even with mitre cutting angles of up to 50°. When working with the HK 55 in combination with the guide or cross cutting guide rail, the cutting edge will always follow the scribe mark edge exactly, even when mitre cutting.

Sophisticated stop system: The cross cutting guide rail has a stop system which allows angle cuts from 0° to 60° to be made with repeat accuracy – in both directions. Ideally suited for serial cutting, e.g. facade formwork.

Precision guidance: The HKC 55 demonstrates its versatility when combined with the Festool guide rail system, too. So, for example, insulation boards can be cut to size quickly and accurately using the FS 1400/2. Additionaly, the new FSK cross cutting guide rails bring a whole new dimension, see below.

And many more features you would expect. Based on the pedigree Festool’s leading TS-55 plunge saws, the HK includes many of the usual features you would expect from a Festool saw, including FastFix blade change, electronic blade brake, fine depth adjustment, riving knife for safety, viewing windows, and more.

FSK cross cutting guide rail for precise cross and mitre cuts.

One click and you’re done. Coupling the HK 55 with the FSK cross cutting guide rail, which is available in three lengths, is incredibly easy. In no time at all, you have a mobile, easy-to-handle mitre-saw system for precise and accurate angled cuts.

 

               

$1,192 Incl. GST.

Includes HKC-55 saw, 2 x 18v 5.2Ah batteries, charger, FSK-420 cross cutting guide rail.

COVID delays... Festool advise ETA 20/11/2020. Pre-order now for earliest possible delivery.
Pre-Order Now
$935 Incl. GST.

standard saw blade W 18; cross cut rail FSK 420; operating tool

COVID delays... Festool advise ETA 20/11/2020. Pre-order now for earliest possible delivery.
Pre-Order Now
$819.01 Incl. GST.

standard saw blade W18; guide rail FS 1400/2; operating tool in SYSTAINER SYS 4 T-LOC

Add to cart
COVID delays... Festool advise ETA 30/10/2020. Pre-order now for earliest possible delivery.
Pre-Order Now
COVID delays... Festool advise ETA 30/10/2020. Pre-order now for earliest possible delivery.
Pre-Order Now
$599.01 Incl. GST.

HKC-55 only - batteries, charger and guide rails not included.


Add batteries, charger, rails and accessories as required to make up preferred kit.

Add to cart
$399 Incl. GST.

for sawing along the width
same dimensions may be re-set using the scale and end stop
mounting on the guide rail without the use of tools

COVID delays... Festool advise ETA 30/10/2020. Pre-order now for earliest possible delivery.
Pre-Order Now
COVID delays... Festool advise ETA 13/11/2020. Pre-order now for earliest possible delivery.
Pre-Order Now
$335.01 Incl. GST.

A collection of guide rail accessories,including clamps, rail connections, kickback stop, deflector, protractor, replacement splinterguard for guide rail.

COVID delays... Festool advise ETA 13/11/2020. Pre-order now for earliest possible delivery.
Pre-Order Now
$279.50 Incl. GST.

Special application saw blade for fibre cement sheet products and compressed concrete sheet up to 15mm

Add to cart
$250 Incl. GST.

Part of the Festool PowerSelect 18 volt system the 6.2Ah AIRSTREAM battery pack provides powerful performance, high endurance and fast charging thanks to Festools AIRSTREAM technology.

Add to cart
$235 Incl. GST.

only for use with the FS-PA

COVID delays... Festool advise ETA 16/10/2020. Pre-order now for earliest possible delivery.
Pre-Order Now
$235 Incl. GST.

for angle cuts on guide rail between 0 and 180

Add to cart
$220 Incl. GST.

Part of the Festool PowerSelect 18 volt system the 6.2Ah AIRSTREAM battery pack provides powerful performance, high endurance and fast charging thanks to Festools AIRSTREAM technology.

Add to cart
COVID delays... Festool advise ETA 27/11/2020. Pre-order now for earliest possible delivery.
Pre-Order Now
$185 Incl. GST.

For use with all lithium ion battery packs (except CXS/TXS), with AIRSTREAM function, replacement lithium-ion charger for 10.8 – 18 V battery packs, weight 1,1 kg, charging current 8 A, input voltage 220 – 240 V.

Add to cart